Tamiya 1/10 Super Avante TD4 4WD EP Off-Road Buggy Kit
- SKU:
- 58696
- Brand:
- Tamiya
The Tamiya Super Avante TD4 1/10 4WD Off-Road Electric Buggy Kit is a high performance chassis with classic Tamiya styling. The body comes in the form of a re-imagined Avante and shares the iconic moniker, Being Nuts is Neat! The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products. To complete the exterior look, star dish wheels are paired with square spike tires giving it the iconic Tamiya look.
A Super New Face
This R/C model assembly kit creates the Super Avante, a 4WD off-road buggy that is bestowed with Tamiya's legendary Avante name. It features an exceptionally low profile design enabled in part by its front inboard suspension, with a shaft-driven 4WD drivetrain powered by a midship motor and employing front/rear ball differentials plus full ball bearings. Its futuristic body design is the work of Kota Nezu at znug design, and features numerous clear sections that just add to the Super Avante's distinctly modern mood, as do the cockpit-rear buttress and the four mini fenders.
TD-4 Chassis:
The TD4 is a shaft-driven 4WD buggy chassis which uses inboard front suspension for slim, low-profile form. It features an inline battery pack position in the center with a mid-transverse motor for optimum balance and performance. The drivetrain uses full bearings with sealed front/rear gearboxes use ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment.
Key Features:
- High performance chassis with classic styling
- Re-imagined Avante body with iconic moniker
- Friction dampeners
- Shaft-driven 4WD chassis based on a one-piece monocoque frame
- Inboard suspension layout for a slimmer front end
- Turnbuckles for precise camber adjustments
What's In The Box?
- 1/10 Tamiya Super Avante TD4 4WD Electric Buggy Kitset
- Polycarbonate Body Shell
- Decal Sheet
- Instruction Manual
Required for Operation (Not Included)
- (1) 2-Channel Radio and Receiver
- (1) Steering Servo
- (1) ESC
- (1) 540-Size Motor
- (1) 7.2-7.4V Battery
- Compatible Charger
- Tamiya PS Paint
- Misc. Building Tools
Take a separate look at the pioneering, futuristic design (the work of Kota Nezu at znug design) from the rear of the model, too!
This is a close-up on the driver figure included in the kit, who is ready to take the wheel and give your buggy a realistic look.
A further glance inside the cockpit shows stickers for display elements. Clear parts are used in three other locations across the car
All four wheels have an individual mini-fender; they are both practical (helping to block flying debris) and provide a unique design element
Buttresses are a trendy aerodynamic item at present, and the Super Avante is endowed with its own polycarbonate design, a separate part
Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders.
The shaft-driven 4WD chassis makes a major contribution to the model's low profile, and is a highly slimline deisgn to boot.
Take a closer look at the front double-wishbone setup with lower "H" arms, and turnbuckle upper arms that allow easy camber tweaks.
Both front and rear gearboxes are sealed, and contain one of these - a ball differential. Steel joints contribute to the model's durability.
Access to the battery pack is provided by the front suspension, which springs up dynamically.
Technical Specifications:
Length: 387mm
Width: 246mm
Height: 117mm (with low wing stays employed)
Wheelbase: 283mm
Tread: 214mm (front), 205mm (rear)
Plastic bathtub frame
Shaft-driven 4WD
Front & rear ball differentials
3-piece steering tie-rod
4- wheel double wishbone suspension
Tire width/diameter: 32/82mm (front), 41/82mm (rear)
CVA oil dampers
Gear Ratio = 10.71:1
Type 540 motor
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
The Tamiya Super Avante TD4 1/10 4WD Off-Road Electric Buggy Kit is a high performance chassis with classic Tamiya styling. The body comes in the form of a re-imagined Avante and shares the iconic moniker, Being Nuts is Neat! The stylish body was designed by Kota Nezu, who has contributed to a number of popular Tamiya products. To complete the exterior look, star dish wheels are paired with square spike tires giving it the iconic Tamiya look.
A Super New Face
This R/C model assembly kit creates the Super Avante, a 4WD off-road buggy that is bestowed with Tamiya's legendary Avante name. It features an exceptionally low profile design enabled in part by its front inboard suspension, with a shaft-driven 4WD drivetrain powered by a midship motor and employing front/rear ball differentials plus full ball bearings. Its futuristic body design is the work of Kota Nezu at znug design, and features numerous clear sections that just add to the Super Avante's distinctly modern mood, as do the cockpit-rear buttress and the four mini fenders.
TD-4 Chassis:
The TD4 is a shaft-driven 4WD buggy chassis which uses inboard front suspension for slim, low-profile form. It features an inline battery pack position in the center with a mid-transverse motor for optimum balance and performance. The drivetrain uses full bearings with sealed front/rear gearboxes use ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment.
Key Features:
- High performance chassis with classic styling
- Re-imagined Avante body with iconic moniker
- Friction dampeners
- Shaft-driven 4WD chassis based on a one-piece monocoque frame
- Inboard suspension layout for a slimmer front end
- Turnbuckles for precise camber adjustments
What's In The Box?
- 1/10 Tamiya Super Avante TD4 4WD Electric Buggy Kitset
- Polycarbonate Body Shell
- Decal Sheet
- Instruction Manual
Required for Operation (Not Included)
- (1) 2-Channel Radio and Receiver
- (1) Steering Servo
- (1) ESC
- (1) 540-Size Motor
- (1) 7.2-7.4V Battery
- Compatible Charger
- Tamiya PS Paint
- Misc. Building Tools
Take a separate look at the pioneering, futuristic design (the work of Kota Nezu at znug design) from the rear of the model, too!
This is a close-up on the driver figure included in the kit, who is ready to take the wheel and give your buggy a realistic look.
A further glance inside the cockpit shows stickers for display elements. Clear parts are used in three other locations across the car
All four wheels have an individual mini-fender; they are both practical (helping to block flying debris) and provide a unique design element
Buttresses are a trendy aerodynamic item at present, and the Super Avante is endowed with its own polycarbonate design, a separate part
Seen from the side, one can appreciate just how lowdown this streamlined buggy gets, with an accent provided by the fenders.
The shaft-driven 4WD chassis makes a major contribution to the model's low profile, and is a highly slimline deisgn to boot.
Take a closer look at the front double-wishbone setup with lower "H" arms, and turnbuckle upper arms that allow easy camber tweaks.
Both front and rear gearboxes are sealed, and contain one of these - a ball differential. Steel joints contribute to the model's durability.
Access to the battery pack is provided by the front suspension, which springs up dynamically.
Technical Specifications:
Length: 387mm
Width: 246mm
Height: 117mm (with low wing stays employed)
Wheelbase: 283mm
Tread: 214mm (front), 205mm (rear)
Plastic bathtub frame
Shaft-driven 4WD
Front & rear ball differentials
3-piece steering tie-rod
4- wheel double wishbone suspension
Tire width/diameter: 32/82mm (front), 41/82mm (rear)
CVA oil dampers
Gear Ratio = 10.71:1
Type 540 motor
Videos
0 Reviews
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.
Related Products
Tamiya 1/10 Egress Off-Road 4WD RC Buggy Kit
58583This is a re-release of the iconic Egress 4WD off-road racing buggy. The Egress first appeared in 1989. It was a follow up kit to the Avante kit, which had a huge fan following. The original Egress...
Tamiya 1/10 DT03 Racing Fighter Off Road Buggy Kit
58628Tamiya 1/10 DT03 Racing Fighter Off Road Buggy Kit The Racing Fighter is mounted on the fun and easy to build DT-03 chassis platform. Intended as an easy-to-get-started model to enco