HPI Racing 1/10 Stage-D10 Ford Mustang RTR Spec 5-FD James Deane Brushed RWD Drift Car RTR
- SKU:
- HPI 161006
- Brand:
- HPI Racing
The Stage-D10 Ford Mustang RTR Spec 5-FD - James Deane is a 1/10th scale pre-assembled 2WD RWD drift car with a 2.4GHz radio system and a painted Ford Mustang RTR Spec 5-FD body in James Deane's Formula Drift livery.
The Stage-D10 is HPI Racing's all-new, purpose-built 1/10th scale rear-wheel-drive drift platform, combining a great Ready-To-Run setup with the huge range of tuning possibilities demanded by today's RC drifters.
Developed from the ground up over three years, the Stage-D10 has been tested across multiple surfaces, by drivers ranging from RWD newcomers to experienced RC drifters. That testing helped HPI refine the chassis, add new features and develop a factory setup that delivers great all-around performance straight out of the box. Underneath, there's a serious amount of adjustment waiting to be explored.
The first Stage-D10 RTR cars come topped with officially licensed 2024 Ford Mustang RTR Spec 5-FD bodies, complete with authentic Formula Drift liveries, molded scale details, replica wheels and a full LED light system.
New to RWD drifting? The Stage-D10 will give you the confidence to get it on the track and start driving. Already know your way around a drift chassis? The Stage-D10 has the base for almost any setup you want straight from the box, with no extra parts required.
Key Features:
- Pre-assembled 1/10th scale 2WD RWD drift car, Ready-To-Run
- Officially licensed 2024 Ford Mustang RTR Spec 5-FD body in James Deane's Formula Drift livery
- Factory-finished and assembled 5-piece polycarbonate body with molded mirrors, vents, grilles and light buckets
- Magnetic body mounting - no body posts through the Mustang shell
- Full LED light system: headlights, upper grille intake lights, tail lights and brake lights
- RTR Aero 5 replica wheels colour-matched to the livery, 3mm offset front and 6mm offset rear
- Removable rear aerodiscs
- HDPE T-Drift compound tyres developed for the Stage-D10
- TF-51 4-channel 2.4GHz transmitter
- RF-51 receiver with LED adaptor
- 20T brushed 540 motor
- SC-3SWP2 60A ESC
- SD-07WR steering servo (Water-Resistant/6.0V/7kg/Plastic Geared)
- D-Box3 Lite drift gyro
- Channel 4 gyro gain adjustment
- XT-60 battery connector
- Adjustable 246 to 264mm wheelbase (255mm standard setup)
- Adjustable front and rear camber links
- Adjustable toe block options included
- Multiple front and rear roll centre and camber gain positions
- Oil-filled threaded-body coilover shocks
- Alternative shock pistons included
- Fully adjustable Ackermann geometry
- Four servo mounting positions
- Adjustable wheel hex spacing with 1mm and 2mm click-in spacers
- Rotating front and rear brake disc hex adaptors
- Adjustable and removable scale brake calipers
- Adjustable battery mounting with mid and rear positions including shorty options
- Over 100 rear motor positions
- 3 or 4 gear gearbox configurations included
- Reversible motor direction for over 200 possible drivetrain configurations
- 2.6 internal FDR
- Sealed composite geared rear differential
- Multiple-position gyro mounting bracket
- Adjustable rear ESC mounting plate
- Integrated chassis wiring guides
- Servo saver and solid servo arm options included
- Motor fan mounting bar
- Rear chassis diffuser
- HPI magnetic body mounting system with 3x10mm N52 magnets, composite locating surrounds and 10mm steel ball mounts
- Aerocatch-style screw-lock mounting option for pre-drilled bodies
- Conventional body post mounting options included
- Metal-shielded ball bearings
- Mounting points for optional front and rear sway bars
What's In The Box?
- (1) Stage-D10 Ford Mustang RTR Spec 5-FD - James Deane 1/10 2WD RWD drift car, pre-assembled with painted body
- (1) TF-51 2.4GHz 4-channel transmitter
- (1) 160362 cross wrench small (plastic)
- (1) 160364 turnbuckle wrench
- (2) Allen wrenches (1.5mm Z901, 2mm Z904)
- (1) Parts bag (spare and optional parts)
- Instruction manuals (startup guide, gyro setup guide, body installation sheet)
Required for Operation (Not Included)
- (4) AA batteries for the transmitter
- 2S 7.4V LiPo or 7.2V NiMH battery pack with XT-60 plug - HPI recommends #160794 Plazma 7.4V 5300mAh 40C LiPo Pack 39.22Wh - XT60
- Battery charger to suit your battery - HPI recommends Reactor 200 or Reactor 600 (#160239 AUS)
- LiPo charge case - HPI recommends #160013 Plazma Pouch
Overview
HPI has a long history of producing detailed replicas of full-size drift cars, and the Stage-D10 release continues that tradition with the Ford Mustang RTR Spec 5-FD. Straight from the RTR Vehicles garage and Formula Drift paddock, three officially licensed versions recreate the cars of Vaughn Gittin Jr., James Deane and Ben Hobson. Each version gets its own authentic livery, with a fully factory-finished and assembled 5-piece polycarbonate body, plus additional molded parts for the mirrors, vents, grilles and light buckets. Each Stage-D10 comes with detailed instructions showing exactly how to set up the body mounting system for the pre-finished Mustang shell, and no body posts stick through the shell.
Aero 5 replica wheels: the Stage-D10 RTR cars come fitted with RTR Aero 5 replica wheels, colour-matched to each livery and completing the look of the full-size RTR Mustangs. The front wheels feature a 3mm offset, with 6mm offset rears giving the Mustang its aggressive drift stance. Wrapped around them are HPI's new harder HDPE T-Drift compound tyres, developed specifically for the Stage-D10. At the rear you'll also find removable aerodiscs, another scale detail taken straight from the full-size drift cars - run them for the full RTR look, or pop them off when you fancy a change.
Light up the track: every Stage-D10 Ford Mustang RTR Spec 5-FD comes with a full LED light system controlled directly from the HPI TF-51 transmitter. Headlights, upper grille intake lights, tail lights and brake lights are all fitted and ready to go, and the CH3 button on the transmitter gives three modes: On, Off or Daylight running. Just like the full-size Mustang, each car gets distinctive grille lighting to match its personality.
Purpose-built for 2WD RWD drifting: the Stage-D10 is a chassis design built specifically for modern RC drifting. The factory setup gives you a capable starting point without needing to understand every adjustment before your first run, and as your driving develops there's a huge range of setup changes available to fine-tune how the car behaves.
Rotating front and rear disc brakes: take a closer look behind the RTR Aero 5 wheels and you'll spot another scale detail. The Stage-D10 features hex adaptor brake discs front and rear that rotate with the wheels. The scale brake calipers have adjustment built in for fine-tuning their position depending on your wheel setup, or they can be removed completely. The brake disc design also forms part of the wheel hex spacing system, allowing the wheel offset to be adjusted by an additional 1mm or 2mm using simple click-in spacers, making track width changes quick and easy.
Flexible ESC mounting and rear diffuser: in the standard Stage-D10 setup, the ESC sits low behind the rear shock tower on the adjustable ESC mounting plate, keeping the electronics neat and the weight low in the chassis. A wiring guide across the top of the shock tower keeps the ESC wiring exactly where it needs to be. Planning to experiment with a rear motor configuration? The ESC can be moved forward of the rear shock tower and mounted on the rear top plate, freeing up the space needed to explore different motor and gearbox positions. A diffuser element smooths airflow under the car for improved aero efficiency, and an easy-access rear mounting point opens up possibilities for future scale detailing options.
Over 100 motor positions: the Stage-D10 gives you more than 100 possible motor positions, allowing major changes to the position of the motor and the weight distribution at the rear of the chassis. The transmission can also be configured with 3 or 4 gears (parts included), with the ability to change the motor direction. Combine the gearbox configurations with all those motor positions and there are more than 200 possible options to experiment with. The drivetrain uses a 2.6 internal FDR and a sealed composite geared rear differential.
Stage-D10 brushed RTR: the 20T brushed 540 motor and 60A ESC make the standard Stage-D10 a great-value way to get into RWD drifting. The smooth, manageable power delivery is easy to get to grips with, giving new drivers plenty of usable performance. And don't mistake brushed for basic - there's more than enough power to get the Stage-D10 sideways and start learning the throttle control, transitions and techniques that make RWD drifting so much fun.
D-Box3 Lite: steering assistance comes from the D-Box3 Lite drift gyro, with EPA and gain adjustment. Gyro gain can be controlled directly from Channel 4 on the TF-51 transmitter.
TF-51 radio system: the TF-51 transmitter has a 4th channel with a 100-position digital slider, steering exponential, a drop-down steering position for a natural control position, a foam-covered wheel, a left-hand-friendly swappable steering wheel design, rubber finger and thumb grips, rubber bumpers on all corners, a magnetic area for body clips or screws, a digital on/off switch, audible warnings for low power and idle time, and servo reverse, EPA, trims and dual rate switches. The RF-51 receiver has a waterproof silicone inner jacket and a built-in failsafe, and uses the HPI 4-way LED Adaptor (160560) via a dedicated LED channel to control the headlights and tail lights.
Fully adjustable front suspension: adjustable camber links, steering links, and multiple roll centre and camber gain positions allow you to fine-tune the front geometry, while the threaded oil-filled coilover shocks make ride height and spring preload changes quick and easy. Mechanical stops are included in the spare parts bag if you want to take things to extremes. Adjustable toe block options give further control over the front suspension setup, with 1mm or 2mm wheel hex spacing providing a quick way to fine-tune the track width. There are also mounting points ready for an optional front sway bar.
Fully adjustable Ackermann: steering setup is a huge part of getting a RWD drift chassis to behave exactly how you want. The Ackermann geometry can be adjusted forward and backward, as well as up and down, allowing you to change the steering geometry and tune how the front wheels work together through different steering angles.
Tune the rear for your driving style: adjustable camber links, toe block options and multiple roll centre and camber gain positions are backed up by the same threaded oil-filled coilover shocks as the front, with a slightly longer +2mm ball link and a stiffer spring. Optional pistons and shock ball link lengths are included. With the gearbox and motor position able to move through a huge range of locations, plus mid or rear battery placement, you can make significant changes to rear weight distribution and then use the suspension geometry to fine-tune the resulting chassis behaviour. Mounting points for an optional rear sway bar are built into the chassis.
Magnetic body mounting: the Stage-D10 uses HPI's new magnetic drift body mounting system. Powerful N52-grade 3x10mm magnets and 10mm steel balls hold the body securely in place without putting mounting holes through the top of the shell. The magnets are held in a composite surround designed to locate perfectly over the 10mm steel ball, which makes lining up and fitting the body easy while giving the magnet extra support for barrier bumps and door taps. For an older or aftermarket shell with body holes already in place, a conical screw-lock system with scale Aerocatch detailing secures the magnets through the existing holes. Traditional body posts are included too, and the chassis has multiple conventional body mounting positions with different post options to suit a wide range of bodyshells.
Metal-shielded ball bearings: the Stage-D10 is fully fitted with metal-shielded ball bearings. The metal shields keep dust away from the internals, while the smooth precision bearings provide optimum power delivery from the power source out into the driveline.
Body choices: any 1/10th scale touring car body from HPI Racing can be fitted to the Stage-D10, from hot hatches to supercars, pick-up trucks to supertouring racers. Adjust the body mounts front and rear and fit your preferred wheel offset. The chassis is set up at a 255mm wheelbase as standard, which suits the majority of HPI Racing bodyshells, and for an aftermarket shell with a different wheelbase a simple system of spacers adjusts the wheelbase from 246mm to 264mm.
Technical Specifications:
| Scale | 1/10 |
| Type | Pre-assembled 2WD RWD drift car, RTR |
| Length | 460mm |
| Width | 200mm |
| Height | 120mm |
| Wheelbase | 255mm (adjustable 246mm to 264mm) |
| Body | Painted Ford Mustang RTR Spec 5-FD - James Deane, 5-piece polycarbonate, 200mm |
| Wheels | RTR Aero 5 26mm, 3mm offset front / 6mm offset rear |
| Tyres | T-Drift 26mm, HDPE compound |
| Motor | 20T brushed 540 |
| ESC | SC-3SWP2 60A |
| Servo | SD-07WR (Water-Resistant/6.0V/7kg/Plastic Geared) |
| Gyro | D-Box3 Lite (EPA, gain) |
| Radio | TF-51 4-channel 2.4GHz transmitter, RF-51 receiver with LED adaptor |
| Battery connector | XT-60 |
| Internal FDR | 2.6 |
| Rear differential | Sealed composite geared |
| Lights | LED headlights, upper grille intake lights, tail lights and brake lights |
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
The Stage-D10 Ford Mustang RTR Spec 5-FD - James Deane is a 1/10th scale pre-assembled 2WD RWD drift car with a 2.4GHz radio system and a painted Ford Mustang RTR Spec 5-FD body in James Deane's Formula Drift livery.
The Stage-D10 is HPI Racing's all-new, purpose-built 1/10th scale rear-wheel-drive drift platform, combining a great Ready-To-Run setup with the huge range of tuning possibilities demanded by today's RC drifters.
Developed from the ground up over three years, the Stage-D10 has been tested across multiple surfaces, by drivers ranging from RWD newcomers to experienced RC drifters. That testing helped HPI refine the chassis, add new features and develop a factory setup that delivers great all-around performance straight out of the box. Underneath, there's a serious amount of adjustment waiting to be explored.
The first Stage-D10 RTR cars come topped with officially licensed 2024 Ford Mustang RTR Spec 5-FD bodies, complete with authentic Formula Drift liveries, molded scale details, replica wheels and a full LED light system.
New to RWD drifting? The Stage-D10 will give you the confidence to get it on the track and start driving. Already know your way around a drift chassis? The Stage-D10 has the base for almost any setup you want straight from the box, with no extra parts required.
Key Features:
- Pre-assembled 1/10th scale 2WD RWD drift car, Ready-To-Run
- Officially licensed 2024 Ford Mustang RTR Spec 5-FD body in James Deane's Formula Drift livery
- Factory-finished and assembled 5-piece polycarbonate body with molded mirrors, vents, grilles and light buckets
- Magnetic body mounting - no body posts through the Mustang shell
- Full LED light system: headlights, upper grille intake lights, tail lights and brake lights
- RTR Aero 5 replica wheels colour-matched to the livery, 3mm offset front and 6mm offset rear
- Removable rear aerodiscs
- HDPE T-Drift compound tyres developed for the Stage-D10
- TF-51 4-channel 2.4GHz transmitter
- RF-51 receiver with LED adaptor
- 20T brushed 540 motor
- SC-3SWP2 60A ESC
- SD-07WR steering servo (Water-Resistant/6.0V/7kg/Plastic Geared)
- D-Box3 Lite drift gyro
- Channel 4 gyro gain adjustment
- XT-60 battery connector
- Adjustable 246 to 264mm wheelbase (255mm standard setup)
- Adjustable front and rear camber links
- Adjustable toe block options included
- Multiple front and rear roll centre and camber gain positions
- Oil-filled threaded-body coilover shocks
- Alternative shock pistons included
- Fully adjustable Ackermann geometry
- Four servo mounting positions
- Adjustable wheel hex spacing with 1mm and 2mm click-in spacers
- Rotating front and rear brake disc hex adaptors
- Adjustable and removable scale brake calipers
- Adjustable battery mounting with mid and rear positions including shorty options
- Over 100 rear motor positions
- 3 or 4 gear gearbox configurations included
- Reversible motor direction for over 200 possible drivetrain configurations
- 2.6 internal FDR
- Sealed composite geared rear differential
- Multiple-position gyro mounting bracket
- Adjustable rear ESC mounting plate
- Integrated chassis wiring guides
- Servo saver and solid servo arm options included
- Motor fan mounting bar
- Rear chassis diffuser
- HPI magnetic body mounting system with 3x10mm N52 magnets, composite locating surrounds and 10mm steel ball mounts
- Aerocatch-style screw-lock mounting option for pre-drilled bodies
- Conventional body post mounting options included
- Metal-shielded ball bearings
- Mounting points for optional front and rear sway bars
What's In The Box?
- (1) Stage-D10 Ford Mustang RTR Spec 5-FD - James Deane 1/10 2WD RWD drift car, pre-assembled with painted body
- (1) TF-51 2.4GHz 4-channel transmitter
- (1) 160362 cross wrench small (plastic)
- (1) 160364 turnbuckle wrench
- (2) Allen wrenches (1.5mm Z901, 2mm Z904)
- (1) Parts bag (spare and optional parts)
- Instruction manuals (startup guide, gyro setup guide, body installation sheet)
Required for Operation (Not Included)
- (4) AA batteries for the transmitter
- 2S 7.4V LiPo or 7.2V NiMH battery pack with XT-60 plug - HPI recommends #160794 Plazma 7.4V 5300mAh 40C LiPo Pack 39.22Wh - XT60
- Battery charger to suit your battery - HPI recommends Reactor 200 or Reactor 600 (#160239 AUS)
- LiPo charge case - HPI recommends #160013 Plazma Pouch
Overview
HPI has a long history of producing detailed replicas of full-size drift cars, and the Stage-D10 release continues that tradition with the Ford Mustang RTR Spec 5-FD. Straight from the RTR Vehicles garage and Formula Drift paddock, three officially licensed versions recreate the cars of Vaughn Gittin Jr., James Deane and Ben Hobson. Each version gets its own authentic livery, with a fully factory-finished and assembled 5-piece polycarbonate body, plus additional molded parts for the mirrors, vents, grilles and light buckets. Each Stage-D10 comes with detailed instructions showing exactly how to set up the body mounting system for the pre-finished Mustang shell, and no body posts stick through the shell.
Aero 5 replica wheels: the Stage-D10 RTR cars come fitted with RTR Aero 5 replica wheels, colour-matched to each livery and completing the look of the full-size RTR Mustangs. The front wheels feature a 3mm offset, with 6mm offset rears giving the Mustang its aggressive drift stance. Wrapped around them are HPI's new harder HDPE T-Drift compound tyres, developed specifically for the Stage-D10. At the rear you'll also find removable aerodiscs, another scale detail taken straight from the full-size drift cars - run them for the full RTR look, or pop them off when you fancy a change.
Light up the track: every Stage-D10 Ford Mustang RTR Spec 5-FD comes with a full LED light system controlled directly from the HPI TF-51 transmitter. Headlights, upper grille intake lights, tail lights and brake lights are all fitted and ready to go, and the CH3 button on the transmitter gives three modes: On, Off or Daylight running. Just like the full-size Mustang, each car gets distinctive grille lighting to match its personality.
Purpose-built for 2WD RWD drifting: the Stage-D10 is a chassis design built specifically for modern RC drifting. The factory setup gives you a capable starting point without needing to understand every adjustment before your first run, and as your driving develops there's a huge range of setup changes available to fine-tune how the car behaves.
Rotating front and rear disc brakes: take a closer look behind the RTR Aero 5 wheels and you'll spot another scale detail. The Stage-D10 features hex adaptor brake discs front and rear that rotate with the wheels. The scale brake calipers have adjustment built in for fine-tuning their position depending on your wheel setup, or they can be removed completely. The brake disc design also forms part of the wheel hex spacing system, allowing the wheel offset to be adjusted by an additional 1mm or 2mm using simple click-in spacers, making track width changes quick and easy.
Flexible ESC mounting and rear diffuser: in the standard Stage-D10 setup, the ESC sits low behind the rear shock tower on the adjustable ESC mounting plate, keeping the electronics neat and the weight low in the chassis. A wiring guide across the top of the shock tower keeps the ESC wiring exactly where it needs to be. Planning to experiment with a rear motor configuration? The ESC can be moved forward of the rear shock tower and mounted on the rear top plate, freeing up the space needed to explore different motor and gearbox positions. A diffuser element smooths airflow under the car for improved aero efficiency, and an easy-access rear mounting point opens up possibilities for future scale detailing options.
Over 100 motor positions: the Stage-D10 gives you more than 100 possible motor positions, allowing major changes to the position of the motor and the weight distribution at the rear of the chassis. The transmission can also be configured with 3 or 4 gears (parts included), with the ability to change the motor direction. Combine the gearbox configurations with all those motor positions and there are more than 200 possible options to experiment with. The drivetrain uses a 2.6 internal FDR and a sealed composite geared rear differential.
Stage-D10 brushed RTR: the 20T brushed 540 motor and 60A ESC make the standard Stage-D10 a great-value way to get into RWD drifting. The smooth, manageable power delivery is easy to get to grips with, giving new drivers plenty of usable performance. And don't mistake brushed for basic - there's more than enough power to get the Stage-D10 sideways and start learning the throttle control, transitions and techniques that make RWD drifting so much fun.
D-Box3 Lite: steering assistance comes from the D-Box3 Lite drift gyro, with EPA and gain adjustment. Gyro gain can be controlled directly from Channel 4 on the TF-51 transmitter.
TF-51 radio system: the TF-51 transmitter has a 4th channel with a 100-position digital slider, steering exponential, a drop-down steering position for a natural control position, a foam-covered wheel, a left-hand-friendly swappable steering wheel design, rubber finger and thumb grips, rubber bumpers on all corners, a magnetic area for body clips or screws, a digital on/off switch, audible warnings for low power and idle time, and servo reverse, EPA, trims and dual rate switches. The RF-51 receiver has a waterproof silicone inner jacket and a built-in failsafe, and uses the HPI 4-way LED Adaptor (160560) via a dedicated LED channel to control the headlights and tail lights.
Fully adjustable front suspension: adjustable camber links, steering links, and multiple roll centre and camber gain positions allow you to fine-tune the front geometry, while the threaded oil-filled coilover shocks make ride height and spring preload changes quick and easy. Mechanical stops are included in the spare parts bag if you want to take things to extremes. Adjustable toe block options give further control over the front suspension setup, with 1mm or 2mm wheel hex spacing providing a quick way to fine-tune the track width. There are also mounting points ready for an optional front sway bar.
Fully adjustable Ackermann: steering setup is a huge part of getting a RWD drift chassis to behave exactly how you want. The Ackermann geometry can be adjusted forward and backward, as well as up and down, allowing you to change the steering geometry and tune how the front wheels work together through different steering angles.
Tune the rear for your driving style: adjustable camber links, toe block options and multiple roll centre and camber gain positions are backed up by the same threaded oil-filled coilover shocks as the front, with a slightly longer +2mm ball link and a stiffer spring. Optional pistons and shock ball link lengths are included. With the gearbox and motor position able to move through a huge range of locations, plus mid or rear battery placement, you can make significant changes to rear weight distribution and then use the suspension geometry to fine-tune the resulting chassis behaviour. Mounting points for an optional rear sway bar are built into the chassis.
Magnetic body mounting: the Stage-D10 uses HPI's new magnetic drift body mounting system. Powerful N52-grade 3x10mm magnets and 10mm steel balls hold the body securely in place without putting mounting holes through the top of the shell. The magnets are held in a composite surround designed to locate perfectly over the 10mm steel ball, which makes lining up and fitting the body easy while giving the magnet extra support for barrier bumps and door taps. For an older or aftermarket shell with body holes already in place, a conical screw-lock system with scale Aerocatch detailing secures the magnets through the existing holes. Traditional body posts are included too, and the chassis has multiple conventional body mounting positions with different post options to suit a wide range of bodyshells.
Metal-shielded ball bearings: the Stage-D10 is fully fitted with metal-shielded ball bearings. The metal shields keep dust away from the internals, while the smooth precision bearings provide optimum power delivery from the power source out into the driveline.
Body choices: any 1/10th scale touring car body from HPI Racing can be fitted to the Stage-D10, from hot hatches to supercars, pick-up trucks to supertouring racers. Adjust the body mounts front and rear and fit your preferred wheel offset. The chassis is set up at a 255mm wheelbase as standard, which suits the majority of HPI Racing bodyshells, and for an aftermarket shell with a different wheelbase a simple system of spacers adjusts the wheelbase from 246mm to 264mm.
Technical Specifications:
| Scale | 1/10 |
| Type | Pre-assembled 2WD RWD drift car, RTR |
| Length | 460mm |
| Width | 200mm |
| Height | 120mm |
| Wheelbase | 255mm (adjustable 246mm to 264mm) |
| Body | Painted Ford Mustang RTR Spec 5-FD - James Deane, 5-piece polycarbonate, 200mm |
| Wheels | RTR Aero 5 26mm, 3mm offset front / 6mm offset rear |
| Tyres | T-Drift 26mm, HDPE compound |
| Motor | 20T brushed 540 |
| ESC | SC-3SWP2 60A |
| Servo | SD-07WR (Water-Resistant/6.0V/7kg/Plastic Geared) |
| Gyro | D-Box3 Lite (EPA, gain) |
| Radio | TF-51 4-channel 2.4GHz transmitter, RF-51 receiver with LED adaptor |
| Battery connector | XT-60 |
| Internal FDR | 2.6 |
| Rear differential | Sealed composite geared |
| Lights | LED headlights, upper grille intake lights, tail lights and brake lights |
Videos
0 Reviews
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.