Bitaxe Gamma 601 1.2TH/s Bitcoin Solo Miner
- SKU:
- BITAXEG601
- Brand:
- Bitaxe
- Availability:
- 4-6 Business Days Transit
The Bitaxe Gamma 601 is a single-chip, open-source Bitcoin miner that runs on a desk off a 5V plugpack. It ships at the AxeOS default of 525 MHz, where it produces about 1.07 TH/s for roughly 22W at the wall; the 1.2 TH/s headline is a small frequency lift to about 590 MHz, made in two clicks in the web interface and comfortably within what the stock heatsink and fan will hold.
At its heart is one Bitmain BM1370 - the same 5nm SHA-256 chip used across a full Antminer S21 Pro hashboard, here running on its own. The board is the work of the Bitaxe open-source project and is published under CERN-OHL-S, which is why several independent builders assemble and sell it.
Setup is a captive Wi-Fi portal: power it up, join the access point it raises, enter your network details and your pool, and from then on it is managed from AxeOS in a browser. The little OLED shows hashrate, chip temperature, uptime and your best share so far. Point it at a solo pool such as solo.ckpool, or at your own node.
Heat output is about 22W. Overclocking past the default is supported in the firmware, but requires a larger cooler and reduces efficiency.
The Gamma 601 runs on 5V DC only. Barrel jacks of this size are also used by many 12V adaptors, and connecting one will destroy the board. Use the supplied adaptor; any replacement must be rated 5V DC at 4A or more.
What's In The Box?
- 1 x Bitaxe Gamma 601 miner (board, heatsink and fan assembled)
- 1 x 5V DC power supply and lead
Technical Specifications:
Manufacturer: Bitaxe (open-source hardware, independently assembled)
Model: Bitaxe Gamma, board revision 601
Algorithm: SHA-256
Mineable coins: Bitcoin (BTC) and other SHA-256 coins
Hashrate: ~1.07 Th/s at the 525 MHz default; ~1.2 Th/s at ~590 MHz
ASIC: 1 x Bitmain BM1370 (5nm)
Power: ~22W at the wall (17.8W board reading) at the default clock
Efficiency: ~20 J/TH at the wall at the default clock
Cooling: 40mm heatsink with a 40mm PWM fan - active cooling required
Voltage: 5V DC, 5.5 x 2.1mm barrel jack, 4A minimum (5-6A recommended)
Interface: 2.4GHz Wi-Fi only - no Ethernet
Display: 0.91 inch 128x32 OLED
Firmware: AxeOS (ESP-Miner), open source, browser-managed
Size: ~100 x 57 x 50mm assembled
Warranty: 12 Month RTB
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
The Bitaxe Gamma 601 is a single-chip, open-source Bitcoin miner that runs on a desk off a 5V plugpack. It ships at the AxeOS default of 525 MHz, where it produces about 1.07 TH/s for roughly 22W at the wall; the 1.2 TH/s headline is a small frequency lift to about 590 MHz, made in two clicks in the web interface and comfortably within what the stock heatsink and fan will hold.
At its heart is one Bitmain BM1370 - the same 5nm SHA-256 chip used across a full Antminer S21 Pro hashboard, here running on its own. The board is the work of the Bitaxe open-source project and is published under CERN-OHL-S, which is why several independent builders assemble and sell it.
Setup is a captive Wi-Fi portal: power it up, join the access point it raises, enter your network details and your pool, and from then on it is managed from AxeOS in a browser. The little OLED shows hashrate, chip temperature, uptime and your best share so far. Point it at a solo pool such as solo.ckpool, or at your own node.
Heat output is about 22W. Overclocking past the default is supported in the firmware, but requires a larger cooler and reduces efficiency.
The Gamma 601 runs on 5V DC only. Barrel jacks of this size are also used by many 12V adaptors, and connecting one will destroy the board. Use the supplied adaptor; any replacement must be rated 5V DC at 4A or more.
What's In The Box?
- 1 x Bitaxe Gamma 601 miner (board, heatsink and fan assembled)
- 1 x 5V DC power supply and lead
Technical Specifications:
Manufacturer: Bitaxe (open-source hardware, independently assembled)
Model: Bitaxe Gamma, board revision 601
Algorithm: SHA-256
Mineable coins: Bitcoin (BTC) and other SHA-256 coins
Hashrate: ~1.07 Th/s at the 525 MHz default; ~1.2 Th/s at ~590 MHz
ASIC: 1 x Bitmain BM1370 (5nm)
Power: ~22W at the wall (17.8W board reading) at the default clock
Efficiency: ~20 J/TH at the wall at the default clock
Cooling: 40mm heatsink with a 40mm PWM fan - active cooling required
Voltage: 5V DC, 5.5 x 2.1mm barrel jack, 4A minimum (5-6A recommended)
Interface: 2.4GHz Wi-Fi only - no Ethernet
Display: 0.91 inch 128x32 OLED
Firmware: AxeOS (ESP-Miner), open source, browser-managed
Size: ~100 x 57 x 50mm assembled
Warranty: 12 Month RTB
Videos
0 Reviews
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.
Related Products
NerdOCTaxe Gamma Rev3.1 12TH/s Bitcoin Solo Miner
NERDOCTAXEG12TEight Bitmain BM1370 chips on a single open-source board, cooled by twin fans. At the firmware's shipped 700 MHz default it produces about 11.4 TH/s for roughly 225W at the wall; the 12 TH/s headline...
NerdOCTaxe Gamma Rev3.1 Hydro 13.8TH/s Bitcoin Solo Miner
NERDOCTAXEGH138TThe same eight-chip NerdOCTaxe-Gamma board, liquid-cooled and factory-tuned to about 13.8 TH/s - the fastest open-source solo miner available, and roughly thirteen times a single-chip Bitaxe. Four...
NerdQaxe++ 4.8TH/s Bitcoin Solo Miner
NERDQAXEPPAIRThe NerdQaxe++ puts four Bitmain BM1370 chips on one open-source board for about 4.8 TH/s at the shipped 600 MHz default, drawing roughly 88W at the wall. That is four to five times a single-chip...
NerdQaxe++ Hydro 4.8TH/s Bitcoin Solo Miner
NERDQAXEPPHYDThe same four-chip NerdQaxe++ board as the air-cooled version - about 4.8 TH/s at the 600 MHz default for roughly 88W at the wall - but with a sealed all-in-one liquid cooler in place of the tower...
DOGEXUS DX01 60MH/s LTC/DOGE Scrypt Solo Miner
DOGEXUSDX01The DOGEXUS DX01 is a desk-sized Scrypt miner rated by its maker at 60 MH/s for about 19W. Scrypt is the algorithm Litecoin and Dogecoin share, so a single machine works both chains at once through a...