All-New ALIGN T-REX TB70 Top Combo RH70E52 is specially designed for extreme 3D flight addicts.
The Align TB70 helicopter is a modern take on the familiar TRex helicopter lineup that have been a top choice for pilots of all skill levels. Unlike historical versions of their 700 size rc helis, the Align TB70 remote control heli features a host of new design features. With three different versions to pick from, the Align TB70 heli can provide you with nearly all the essentials you need, or allow you to outfit the model with your own hand picked electronics to suit your preferences.
One of the most unique design differences is the belt driven tail and motor gear train, which provide pilots with simple adjustments and ease of maintenance for the entire drive system. The drive system is housed inside of the main frame, which are composed of a 2mm thick upper frame, and 3.5mm thick lower frame.
The upper frame has a lot of space for electronics, and keeping your wires tied up nicely, so everything is neat and easy to access. The cyclic servos are horizontally mounted, and provide great geometry due to their symmetrical mounting. The lower frames feature a POM white plastic that surround the outer edge of the frame, and feature Align TB70 branding to not only stand out on the bench, but add increased visibility in flight in areas that normally aren't easily visible.
The tail system features several features that make owning a tail belt driven heli simple. Tail belt tension can be adjusted by adjusting two rear facing screws at the end of the rear tail boom clamp. This, paired with an adjustable tail belt tensioning system, makes it easy for pilots to find their desired belt tension with ease. The tail box features a lightweight design, that is strong, yet simple to service.
Key Features:
- Efficient Belt-Drive Design
- Integrated Composite Material Side Plates Engineered with Propitiatory Embedding Technology
- Lighter, Quieter, and Stronger compared to Prior ALIGN TREX 700 Models
- New Streamline Designed TB70 Canopy
- Upgraded Canopy Mounting System
What's In The Box?
- TB70 Kit Set x 1 set
- 700 Carbon Fiber Blades x 1 set
- 105mm 3K Carbon Fiber Tail Blades x 1 set
- 850MX Brushless Motor(490KV/4535) x 1
Required for Operation (Not Included)
- Transmitter(6-channel or more, helicopter system)
- Receiver(6-channel or more)
- RCC-6CX Intelligent Balance Charger
- 22.2V 6S 4000~4800mAh Li-Po Battery x 2
- Digital Pitch Gauge
- Multi-function Tester
- Flybarless System
- CCPM Brushless Servo x 3
- Rudder Brushless Servo x 1
- Brushless ESC x 1
Technical Specifications:
Length: 1356mm
Height: 358mm
Width: 187mm
Main Blade Length: 650-730mm
Main Rotor Diameter: 1542mm
Tail Length: 105-115mm
Tail Rotor Diameter: 279mm
Motor Belt Pulley: 22T
Belt Pulley: 50T
Front Drive Main Shaft: 15T
Main Drive Gear: 62T
Autorotation Tail Drive Gear: 27T
Tail Drive Gear: 23T
Drive Gear Ratio: 9.38:1:4.83
Max RPM(approx.): 2400RPM
Flying Weight(With Battery): Approx. 5kg (ALIGN 12S 5200mAh)
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
All-New ALIGN T-REX TB70 Top Combo RH70E52 is specially designed for extreme 3D flight addicts.
The Align TB70 helicopter is a modern take on the familiar TRex helicopter lineup that have been a top choice for pilots of all skill levels. Unlike historical versions of their 700 size rc helis, the Align TB70 remote control heli features a host of new design features. With three different versions to pick from, the Align TB70 heli can provide you with nearly all the essentials you need, or allow you to outfit the model with your own hand picked electronics to suit your preferences.
One of the most unique design differences is the belt driven tail and motor gear train, which provide pilots with simple adjustments and ease of maintenance for the entire drive system. The drive system is housed inside of the main frame, which are composed of a 2mm thick upper frame, and 3.5mm thick lower frame.
The upper frame has a lot of space for electronics, and keeping your wires tied up nicely, so everything is neat and easy to access. The cyclic servos are horizontally mounted, and provide great geometry due to their symmetrical mounting. The lower frames feature a POM white plastic that surround the outer edge of the frame, and feature Align TB70 branding to not only stand out on the bench, but add increased visibility in flight in areas that normally aren't easily visible.
The tail system features several features that make owning a tail belt driven heli simple. Tail belt tension can be adjusted by adjusting two rear facing screws at the end of the rear tail boom clamp. This, paired with an adjustable tail belt tensioning system, makes it easy for pilots to find their desired belt tension with ease. The tail box features a lightweight design, that is strong, yet simple to service.
Key Features:
- Efficient Belt-Drive Design
- Integrated Composite Material Side Plates Engineered with Propitiatory Embedding Technology
- Lighter, Quieter, and Stronger compared to Prior ALIGN TREX 700 Models
- New Streamline Designed TB70 Canopy
- Upgraded Canopy Mounting System
What's In The Box?
- TB70 Kit Set x 1 set
- 700 Carbon Fiber Blades x 1 set
- 105mm 3K Carbon Fiber Tail Blades x 1 set
- 850MX Brushless Motor(490KV/4535) x 1
Required for Operation (Not Included)
- Transmitter(6-channel or more, helicopter system)
- Receiver(6-channel or more)
- RCC-6CX Intelligent Balance Charger
- 22.2V 6S 4000~4800mAh Li-Po Battery x 2
- Digital Pitch Gauge
- Multi-function Tester
- Flybarless System
- CCPM Brushless Servo x 3
- Rudder Brushless Servo x 1
- Brushless ESC x 1
Technical Specifications:
Length: 1356mm
Height: 358mm
Width: 187mm
Main Blade Length: 650-730mm
Main Rotor Diameter: 1542mm
Tail Length: 105-115mm
Tail Rotor Diameter: 279mm
Motor Belt Pulley: 22T
Belt Pulley: 50T
Front Drive Main Shaft: 15T
Main Drive Gear: 62T
Autorotation Tail Drive Gear: 27T
Tail Drive Gear: 23T
Drive Gear Ratio: 9.38:1:4.83
Max RPM(approx.): 2400RPM
Flying Weight(With Battery): Approx. 5kg (ALIGN 12S 5200mAh)
Videos
0 Reviews
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.