This is the Align T-Rex 300X Electric Helicopter Combo Kit, with motor, ESC, and Servos. The T-Rex 300X is small in size but by no means small in performance. This model adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. The narrow body design makes the mechanical structure much stronger. The battery slider and top-mounted motor design is anodized a bright red color to bring out eye catching texture on this model. A thickened aluminum alloy tail boom is included for the best torsion resistance and increases the tail support rod lifetime. The progressive lightweight landing skid makes this model the leader in its class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.
The standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. This provides consistent power output and keeps stable RPM in non-stop 3D flying for presenting perfect performance. It pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.
*Note this Helicopter is supplied as a kit and requires assembly.
WHAT'S IN THE BOX?
- (1) T-REX 300X Helicopter
- (1) Set of 230 Carbon Fiber Blades
- (1) Set of 50 Tail Blade
- (1) RCE-BL25A 25 Brushless ESC
- (1) 300MX Brushless Motor (3700KV/2216)
- (3) DS450 Digital servo
- (1) Digital Tail servo
REQUIRED FOR OPERATION (NOT INCLUDED):
- Transmitter (6 Channel Radio)
- Receiver (6 Channel)
- Flybarless Gyro System
- (1+) LiPo Battery 3S1P 11.1V 1300mAh 30C w/XT-30 Connector
- Digital Pitch Gauge
- Balance charger
Technical Specifications:
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight(w/o battery): 418g
-
Align 300x
Absolutely amazing little heli just what I needed
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
This is the Align T-Rex 300X Electric Helicopter Combo Kit, with motor, ESC, and Servos. The T-Rex 300X is small in size but by no means small in performance. This model adopts DFC rotor head unit, low CG and low wind resistance providing direct flight responses. The carbon fiber main frame is made of composite material and with reinforcement plate and brace assembly effectively enhancing structural intensity and torsion resistance. The narrow body design makes the mechanical structure much stronger. The battery slider and top-mounted motor design is anodized a bright red color to bring out eye catching texture on this model. A thickened aluminum alloy tail boom is included for the best torsion resistance and increases the tail support rod lifetime. The progressive lightweight landing skid makes this model the leader in its class. Plus the fiberglass painted canopy features lightweight and low in wind resistance.
The standard high torque and high efficiency 300MX 3700KV/2216 brushless motor not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation. This provides consistent power output and keeps stable RPM in non-stop 3D flying for presenting perfect performance. It pairs with digital HV DS450 and DS455 servos, supporting 8.4V output, fast response and high torque. The new 25A brushless speed governor support 5~8.4V adjustable BEC voltage.
*Note this Helicopter is supplied as a kit and requires assembly.
WHAT'S IN THE BOX?
- (1) T-REX 300X Helicopter
- (1) Set of 230 Carbon Fiber Blades
- (1) Set of 50 Tail Blade
- (1) RCE-BL25A 25 Brushless ESC
- (1) 300MX Brushless Motor (3700KV/2216)
- (3) DS450 Digital servo
- (1) Digital Tail servo
REQUIRED FOR OPERATION (NOT INCLUDED):
- Transmitter (6 Channel Radio)
- Receiver (6 Channel)
- Flybarless Gyro System
- (1+) LiPo Battery 3S1P 11.1V 1300mAh 30C w/XT-30 Connector
- Digital Pitch Gauge
- Balance charger
Technical Specifications:
Length: 476mm
Height: 158mm
Width: 88mm
Main Blade Length: 230mm
Main Rotor Diameter: 525mm
Tail Rotor Diameter: 143mm
Motor Pinion Gear: 14T
Main Drive Gear: 115T
Main Drive Pulley: 40T
Tail Drive Gear: 13T
Drive Gear Ratio: 8.21:1:3.08
Weight(w/o battery): 418g
Videos
1 Review
-
Align 300x
Absolutely amazing little heli just what I needed
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.
Related Products
Align T-Rex 300X Super Combo RTF Helicopter
RH30E01XThis is an Align T-Rex 300X Electric Helicopter, a redesigned T-REX 300X RTF (Ready to Fly), pre-assembled and combo'd with an Aign A10 10 channel 2.4GHz transmitter, and Mini GRS gyro...