The classic Tamiya Monster Beetle is an iconic R/C kit. This version takes the classic body, shrinks it to a smaller scale, and mounts it on a variant GF-01 chassis called the GF-01TR!
The GF-01TR fits the gear-driven GF-01 chassis with reduction gears (also known as portal axles). This modification allows the hobbyist to better transverse trail terrain as it lifts the bottom of the chassis to better clear obstacles that could high center the vehicle and render it stuck.
GF-01TR Chassis:
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Reduction gears on each axle slow drive shaft rotation for immense traction, great ground clearance, and the ability to take on tough off-road terrain. The gearbox is sealed to protect from dust and debris, and integrated into the frame; built-in differential gears provide superb traction and durability with the use of included diff putty. 4-wheel double wishbone suspension utilizes friction dampers, while a 2-piece tie rod steering setup with the servo on the left gives excellent response. Yellow wheels are fitted with 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. The chassis utilizes a ‘square’ setup with similar tread and wheelbase lengths.
FEATURES:
• 1/14 scale R/C model assembly kit. Length: 333mm, width: 270mm. Wheelbase: 274mm.
• Body is molded in red ABS Plastic. It depicts a customized Beetle with gaping fenders, triple auxiliary lights and a shortened rear end.
• Metal-plated parts for headlights, auxiliary lights and engine.
• The model is based upon the tough, reduction gear-fitted GF-01TR variant chassis.
• 37.35:1 gear ratio (with the kit-standard 18T pinion gear) gives great drive. The model is also compatible with 20T pinion gears (for a 33.61:1 gear ratio).
• Yellow wheels are complimented by 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip.
• Includes 540-type motor.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit).
Specifications
• Length: 333mm, Width: 270mm, Height: 215mm
• Wheelbase: 174mm
• Tread: 210mm (Front & Rear)
• Tire Width/Diameter: 68/115mm (Front & Rear)
• Monocoque Frame
• 3-Bevel Differential Gears
• 2-Piece Steering Tie-Rod
• 4-Wheel Independent Double Wishbone Suspension
• Gear Ratio = 37.35:1 (using kit standard 18T pinion gear)
• Type 540 Motor
• Electronic Speed Controller (ESC) is sold separately.
Required for Operation (Not Included)
• 2-channel R/C system w/ESC
• R6/AA/UM3 batteries for transmitter
• Battery pack & charger
Shipping
$13.50 Flat Rate - Nationwide!
Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.
Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM.
We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.
International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you
a quote.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to. You will be provided with a no-cost return addressed courier satchel (or similar)
and we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway
tracking emails we send out.
Alternatively you can call Courier Post on
0800 268 743 or Post Haste on
09 444 2950
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged
or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend
using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required”
option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost
of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive
a Store Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not
like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also
require additional items to complete.
Description
The classic Tamiya Monster Beetle is an iconic R/C kit. This version takes the classic body, shrinks it to a smaller scale, and mounts it on a variant GF-01 chassis called the GF-01TR!
The GF-01TR fits the gear-driven GF-01 chassis with reduction gears (also known as portal axles). This modification allows the hobbyist to better transverse trail terrain as it lifts the bottom of the chassis to better clear obstacles that could high center the vehicle and render it stuck.
GF-01TR Chassis:
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. Reduction gears on each axle slow drive shaft rotation for immense traction, great ground clearance, and the ability to take on tough off-road terrain. The gearbox is sealed to protect from dust and debris, and integrated into the frame; built-in differential gears provide superb traction and durability with the use of included diff putty. 4-wheel double wishbone suspension utilizes friction dampers, while a 2-piece tie rod steering setup with the servo on the left gives excellent response. Yellow wheels are fitted with 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip. The chassis utilizes a ‘square’ setup with similar tread and wheelbase lengths.
FEATURES:
• 1/14 scale R/C model assembly kit. Length: 333mm, width: 270mm. Wheelbase: 274mm.
• Body is molded in red ABS Plastic. It depicts a customized Beetle with gaping fenders, triple auxiliary lights and a shortened rear end.
• Metal-plated parts for headlights, auxiliary lights and engine.
• The model is based upon the tough, reduction gear-fitted GF-01TR variant chassis.
• 37.35:1 gear ratio (with the kit-standard 18T pinion gear) gives great drive. The model is also compatible with 20T pinion gears (for a 33.61:1 gear ratio).
• Yellow wheels are complimented by 115mm diameter hybrid pin spike/lug pattern tires for superior cushioning and grip.
• Includes 540-type motor.
• Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit).
Specifications
• Length: 333mm, Width: 270mm, Height: 215mm
• Wheelbase: 174mm
• Tread: 210mm (Front & Rear)
• Tire Width/Diameter: 68/115mm (Front & Rear)
• Monocoque Frame
• 3-Bevel Differential Gears
• 2-Piece Steering Tie-Rod
• 4-Wheel Independent Double Wishbone Suspension
• Gear Ratio = 37.35:1 (using kit standard 18T pinion gear)
• Type 540 Motor
• Electronic Speed Controller (ESC) is sold separately.
Required for Operation (Not Included)
• 2-channel R/C system w/ESC
• R6/AA/UM3 batteries for transmitter
• Battery pack & charger
Videos
0 Reviews
Shipping & Returns
Shipping
$13.50 Flat Rate -Nationwide!
Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within
24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch
the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise
the buyer of the expected dispatch date.
In stock items are generally dispatched on the following business day, unless a different time frame is specified
in relation to a particular product and provided the order was placed before our daily cut off time which is usually
around 1PM - 2PM.
We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra
day for big parcels to reach the South Island and for rural deliveries.
We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.
Tracking emails will be sent out once parcels have been collected.
The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to
leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will
not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.
Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes
International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you
a quote after your order has been placed.
sales@rchobbies.co.nz
Returns Policy
The item I received is not the item I ordered
Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the
original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and
we will process your replacement within 1–3 days of receiving your item.
The item I ordered arrived faulty.
Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving
RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced
by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees
Act to provide a remedy.
The item I ordered did not arrive
If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.
Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704
If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been
delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.
Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen
after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature
Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.
I've changed my mind and no longer want the item I ordered
Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned
within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of
the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store
Credit or refund less the restock fee and freight charges.
Restock fee
All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is
10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like
it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require
additional items to complete.
Related Products
Tamiya 1/10 Monster Beetle RC Kit
58618Tamiya 1/10th Monster Beetle Kit The Tamiya Monster Beetle was
Tamiya Monster Beetle Sealed Bearing Kit
TBK-MBBFRC Hobbies Rubber Sealed Bearing kit. Suits Monster Beetle Chassis Includes a total of 12 bearings. *Note : Bearing numbers may differ between kits.Some Kits may included metal shield variants.