null
HobbyWing 30302360 SeaKing 120A V3 Brushless ESC

HobbyWing 30302360 SeaKing 120A V3 Brushless ESC

(No reviews yet) Write a Review
SKU:
30302360
Brand:
$169.00 inc GST

Out of stock

Buy With Confidence.

Payment Options:

Specifications:

Cont./Peak Current:  120A/720A

Input 2-6S LiPo OR 6-18 Cells NiMH

BEC Output Linear Mode:  6V/5A


Wires & Connectors

Input Wires:  Red and Black -12AWG- 200mm x 1  

Output Wires:  Black- 12AWG- 150mm x 3

Input and output Connectors: NO


ESC Programing:

via Transmitter: Supported

LED Program Box: Supported

LCD Program Box: Not Supported

WiFi Module: Not Supported

Program Port: Separate Program Port

Firmware:

Firmware Upgrade: Not Supported


Size & Weight:

Size:  68.5x39.4x32mm

I.D./O.D. of the Water  Ф3.0/5.4 mm

Weight: 150g

Applications:

Boat Length <110cm

Performance & Reliability

Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability.
Multiple safety adjustable options are in use, with the implementation of the low-voltage cut off protection, thermal protection and throttle signal loss protection.

Efficient Cooling System

The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design

100% waterproof without the need of extra protection.

Built-in BEC

The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this ESC compatible with high voltage servo.

Separate PRG/FAN Port

The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming.

Installation & Connection

Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.)

For safety, please always keep the propeller away from human body or any other objects.
Red color input wire is positive pole, Black color input wire is negative pole.

Shipping
$13.50 Flat Rate - Nationwide!

Saturday Delivery
Unfortunately Saturday delivery is no longer available at RC Hobbies.

Delivery
Once RC Hobbies has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within 1-3 Business days unless a different time frame is specified in relation to a particular product. If we are unable to dispatch the buyer's order within the time frame specified by RC Hobbies we will endeavor to contact the buyer and advise the buyer of the expected dispatch date.

In stock items are generally dispatched on the same day you place your order, unless a different time frame is specified in relation to a particular product and provided the order was placed before our daily cut off time which is usually around 1PM.

We use NZ Post, Aramex, and Post Haste for New Zealand orders. Deliveries are usually 2 working days, but please allow an extra day for big parcels to reach the South Island and for rural deliveries.

We use NZ Post for orders that can fit into overnight courier bags and Post Haste for larger parcels.

Tracking emails will be sent out once parcels have been collected.

The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies will not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.


Delivery to PO Boxes
RC Hobbies can send goods to PO Boxes, except for large freight boxes.

International Delivery.
We're based in New Zealand but we deliver all round the world. Please use our shipping estimator at checkoutfor a shipping quote or contact us and will send you a quote.

sales@rchobbies.co.nz

Returns Policy

The item I received is not the item I ordered

Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the original item to. You will be provided with a no-cost return addressed courier satchel (or similar) and we will process your replacement within 1–3 days of receiving your item.

The item I ordered arrived faulty.

Please arrange with RC Hobbies to return the item for testing. If we confirm that the item was damaged before leaving RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced by RC Hobbies Ltd free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees Act to provide a remedy.

The item I ordered did not arrive

If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.

Alternatively you can call Courier Post on 0800 268 743 or Post Haste on 09 444 2950

If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been delivered within the timeframe we will start an investigation with Courier Post & Post Haste on your behalf.

Regrettably, neither RC Hobbies nor Courier Post & Fastway are able to refund or replace items that have been lost, damaged or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.

I've changed my mind and no longer want the item I ordered

Change of mind returns can be processed as long as it has been agreed by RC Hobbies and the item has been returned within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store Credit or refund less the restock fee and freight charges.

Restock fee

All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is 15% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require additional items to complete.

Description

Specifications:

Cont./Peak Current:  120A/720A

Input 2-6S LiPo OR 6-18 Cells NiMH

BEC Output Linear Mode:  6V/5A


Wires & Connectors

Input Wires:  Red and Black -12AWG- 200mm x 1  

Output Wires:  Black- 12AWG- 150mm x 3

Input and output Connectors: NO


ESC Programing:

via Transmitter: Supported

LED Program Box: Supported

LCD Program Box: Not Supported

WiFi Module: Not Supported

Program Port: Separate Program Port

Firmware:

Firmware Upgrade: Not Supported


Size & Weight:

Size:  68.5x39.4x32mm

I.D./O.D. of the Water  Ф3.0/5.4 mm

Weight: 150g

Applications:

Boat Length <110cm

Performance & Reliability

Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability.
Multiple safety adjustable options are in use, with the implementation of the low-voltage cut off protection, thermal protection and throttle signal loss protection.

Efficient Cooling System

The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

Waterproof Design

100% waterproof without the need of extra protection.

Built-in BEC

The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this ESC compatible with high voltage servo.

Separate PRG/FAN Port

The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming.

Installation & Connection

Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.)

For safety, please always keep the propeller away from human body or any other objects.
Red color input wire is positive pole, Black color input wire is negative pole.

Videos

0 Reviews

This product hasn't received any reviews yet. Be the first to review this product!
Write a Review

Shipping & Returns

Shipping
$13.50 Flat Rate -Nationwide!







Delivery
Once E&E TRADERS LTD has confirmed acceptance of the buyer's order, we will endeavor to dispatch the buyer's order within 24 Hours unless a different time frame is specified in relation to a particular product. If we are unable to dispatch the buyer's order within the time frame specified by E&E TRADERS LTD we will endeavor to contact the buyer and advise the buyer of the expected dispatch date.

In stock items are generally dispatched on the following business day, unless a different time frame is specified in relation to a particular product and provided the order was placed before our daily cut off time which is usually around 1PM - 2PM.

We use Courier Post and Fastway for New Zealand orders. Deliveries are usually overnight, but please allow an extra day for big parcels to reach the South Island and for rural deliveries.

We use Courier Post for orders that can fit into overnight courier bags and Fastway for larger parcels.

Tracking emails will be sent out once parcels have been collected.

The buyer may specify delivery instructions for an order (for example, the buyer may authorise the delivery agent to leave the products in a specified location if the buyer will not be at the delivery address). RC Hobbies 12 Ltd will not be responsible for any order that is delivered in accordance with the buyer’s delivery instructions.


Delivery to PO Boxes
E & E TRADERS LTD can send goods to PO Boxes

International Delivery.
We're based in New Zealand but we deliver all round the world. Please contact us for a shipping quote or we will send you a quote after your order has been placed.

sales@rchobbies.co.nz

Returns Policy

The item I received is not the item I ordered

Provided the item is unopened and in mint condition we’ll replace the item. To receive your replacement you must return the original item to E & E TRADERS LTD. You will be provided with a no-cost return addressed courier satchel (or similar) and we will process your replacement within 1–3 days of receiving your item.

The item I ordered arrived faulty.

Please arrange with E & E TRADERS LTD to return the item for testing. If we confirm that the item was damaged before leaving RC Hobbies, or was faulty out of the box, your item will be repaired or if it cannot be repaired then it will be replaced by E & E TRADERS LTD free of charge. If the goods are faulty we will meet our obligations under the Consumers Guarantees Act to provide a remedy.

The item I ordered did not arrive

If your item did not arrive the first thing to do is request a “track and trace” on your item from the Courier Post or Fastway tracking emails we send out.

Alternatively you can call Courier Post on 0800 268 743 or Fastway on 09 634 3704

If the “track and trace” on your order indicates that it has been delivered, but you’re unable to find it or it hasn’t been delivered within the timeframe we will start an investigation with Courier Post & PostHaste on your behalf.

Regrettably, neither RC Hobbies nor Courier Post & PostHaste are able to refund or replace items that have been lost, damaged or stolen after being delivered to your property. If you are concerned about leaving your items unattended we recommend using “Signature Required” option which is our default option unless advise by the Buyer to use the “No Signature Required” option.

I've changed my mind and no longer want the item I ordered

Change of mind returns can be processed as long as it has been agreed by E & E TRADERS LTD and the item has been returned within 7 days of dispatch and is unopened and in mint condition. The shipping for the return will also be at the cost of the buyer. Once we have the item in hand we will assess the item and if everything checks out OK you will receive a Store Credit or refund less the restock fee and freight charges.

Restock fee

All goods ordered in error by the Customer or goods the Customer wishes to return are subject to a restock fee. The fee is 10% of the goods sales value. This applies if you change your mind, ordered it in error, unwanted Gift or just did not like it or did not suit you, so please choose carefully and read the descriptions in the listings as some products also require additional items to complete.

Related Products